Fuel injector cleaners have been in the market for years. The question is, does fuel injector cleaner work? The answer is simple. If used correctly, the fuel injector cleaner can be the most effective in cleaning out the fuel pathways. It is a solvent that is accessible in different bottles and poured into the fuel tank when there is a demand to de-clog deposit buildup and injectors of a car.
Table of Contents
Ingredients used on fuel injector cleaner
There are three common ingredients found in the cleaner are:
1. Polyether amine
The ingredient is used for both diesel and petro applications. It helps to reduce misfiring from the engine. Additionally, it is also known to eliminate excessive moisture from the fuel line. The ingredient is helpful, especially when old gas in the fuel tank can block the fuel line without burning.
2. Polyether amine or PEA
The chemical ingredient is included in the injector cleaner so that they help in dissolving solid deposits clogged in the fuel lines. When solid deposits get clogged in the fuel system it reduces the effective driving potential of the vehicle. The reduced fuel delivery also increases the chances of misfiring the engine. One must be cautious of using this ingredient as excessive of it can cause problems.
3. Polyisobutylene
Similar to polyether amine, polyisobutylene also has synonymous cleaning qualities. Additionally, both the ingredients are also known to feature similar chemical compositions.
Working principle of injector cleaner
Often people question does fuel injector cleaner work. They can be highly effective if the right working mechanism is applied. The entire fuel system gets cleaned as the cleaner dissolves the solid particles, residues, and gum collected in the fuel lines. The fuel filter can significantly safeguard debris from entering the fuel system. But some tiny particles and residues often pass through and cause the entire fuel line. Fuel injector cleaners are known as combustible cleaning solvents. Henceforth, they get burnt off inside the engine while it is operating.
Why fuel injector cleaners are used?
Primarily, there are two reasons for using fuel injector cleaners.
Eliminate carbon collection
Additives are already included in the fuel system to eliminate the carbon buildup. But the reality is that carbon buildup is a serious problem in the intake valve area, and only the application of fuel injector cleaners is the solution. The rear side of the intake valve acquires carbon layers that reduce the fuel mixture velocity and also bar the proper sealing of the valve. Some other areas prone to carbon buildup are cylinder head, piston head, intake manifold, and so on. Fuel injector cleaners are considered the best solution to clear carbon deposits and experience a better running engine.
Fuel efficiency
The modern fuel injectors operate on close tolerances via which supercharged fuel is exerted. For optimal functioning, the injectors are required to promote an atomized layer of fuel whenever demanded. The clogging of fuel channels can disturb efficient functioning. Since the vehicle operates roughly, there is a reduction in fuel efficiency as well. Fuel injector cleaner can effectively solve the problem.
Conclusion
From the above analysis, there is a clear answer to the question, does fuel injector cleaner work? With the proper application of injector cleaner, the vehicle starts running smoothly, without carbon deposition, and also experiences an increased fuel efficiency.